AutoSculpt
is must-have Scanner for practitioners, because
of the following advantages:
|
 |
Resolution : Scanning rate 50 lines/second.
Resolution depends on wand-object range typically
0.02 inches at 8 inches, 0.04 inches at 2 inches/second |
|
File format : Compatible to most of O&P Industry
standards, (.3ds, .txt, .dxf, .lwo, .mat, .stl,
.wrl, .obg, .iv, .vtk) etc. |
|
Range : Up to 0.75m or 75cm (30 inches) |
|
Accuracy : 1mm at 200mm (0.04 inches at 8 inches)
range |
|
Operating temp : -5 to + 50 Celsius |
|
Operating power :120 to 240 V AC |
|
Electronic Unit : 11.0 inches L x 11.4 inches
W x 3.6 inches H
Laser wand - 230mm (9 inches) length
Laser 670nm, 1mW, Class II
Optional Laser Wand – 368.3 mm (14.5 inches)
in length |
|
USB Interface |
|
Computer : Minimum 2 GHZ speed, 512
RAM, more is needed for larger data sets, Windows
2000, XP |
|
